Home
Products
Exports
Brochures
Login
Contact Us

 

Welcome To Eurolock - South Africa - Vehicle Security With Distinction.

 

 

               Vehicle Security With Distinction


How thieves select a car to either steal or break into.

 
 

 


 

 

MODEL: AR401

ADVANCED REMOTE CONTROLLED ALARM WITH ULTRASONIC DETECTOR

FeaturesContentsPackagingManual

 

Features of the Eurolock AR401    Back

  • Perimeter alarm protection (doors, boot and bonnet).
  • Ultrasonic detector.
  • Isolation of ultrasonic detector.
  • LED state indication.
  • "Intelligent" LED indication (alarm diagnostics).
  • Visual ON/OFF indication via hazard lights.
  • Audible ON/OFF indication via siren.
  • "Advanced" remote control.
  • Up to 6 remote controls.
  • Unique ID code.
  • Panic facility.
  • Central locking output facility.
  • Selective unlocking output facility.
  • Auto lock if central locking fitted.
  • Auto unlock if central locking fitted (programmable).
  • Ignition tamper protection (hot wire protection).
  • Battery "Low" indicator on remote control.
  • Remote battery "Low" indicator via system.
  • Power down protection.
  • Dual ultrasonic detector (optional).
  • Secure PIN code, "One" event override.
  • Auto arming (programmable).
  • Secure housing.
  • Armoured Housing (optional).
  • Customisation of features.

 

Kit Component List AR401    Back

Main Component Box

    1 x AR401 Owners Manual.

    1 x Secret Code Card.

    1 x Control Unit in housing with rubber grommet.

    2 x Two button Remote controls

    1 x Ultrasonic detector (Only with AR400-01)

    1 x 6-Way connector with black wire harness and LED.

    1 x 4-Way connector with black wire harness.

    1 x 2-Way connector with black wire harness.

    1 x 2-Way black connector with black wire harness.

    1 x packet containing 4 screws, 4 plugs and LED holder.

Horn / Speaker Box

1 x Horn / Speaker

 

Packaging of Units – AR401    Back

Packaged 1 Unit

  • Weight 0.46 KG
  • Dimensions 21cm x 16cm x 5.5cm

Packaged 10 Units

  • Weight 4.70 KG
  • Dimensions 33cm x 29cm x 23cm

Packaged 20 Units

  • Weight 09.93 KG
  • Dimensions 59cm x 34cm x 25cm

 

Packaging of Speaker / Horn Units – AR401

Packaged 1 Unit

  • Weight 0.43 KG
  • Dimensions 12cm x 10cm x 10cm

Packaged 10 Units

  • Weight 4.30 KG

Packaged 20 Units

  • Weight 8.60 KG

 

Owners' Manual    Back

MODEL: AR401

ADVANCED REMOTE CONTROLLED ALARM WITH ULTRASONIC DETECTOR

 

INTRODUCTION

Congratulations on your choice of a Eurolock Security System to protect your vehicle. The Eurolock AR401 is an easy to use system with a wide range of features that provides a high level of security to the driver and vehicle while being convenient to use.

Read the operating instructions carefully to familiarise yourself with the features and operation of the system.

 

Features of the Eurolock AR401

Perimeter alarm protection (doors, boot and bonnet).

Ultrasonic detector.

Isolation of ultrasonic detector.

LED state indication.

"Intelligent" LED indication (alarm diagnostics).

Visual ON/OFF indication via hazard lights.

Audible ON/OFF indication via siren.

"Advanced" remote control.

Up to 6 remote controls.

Unique ID code.

Panic facility.

Central locking output facility.

Selective unlocking output facility.

Auto lock if central locking fitted.

Auto unlock if central locking fitted (programmable).

Ignition tamper protection (hot wire protection).

Battery "Low" indicator on remote control.

Remote battery "Low" indicator via system.

Power down protection.

Dual ultrasonic detector (optional).

Secure PIN code, "One" event override.

Auto arming (programmable).

Secure housing.

Armoured Housing (optional).

Customisation of features.

 

Remote Control Transmitters

Each unit is supplied with two remote controls. Each remote has two push buttons, which are used to ARM and DISARM the alarm.

Press the Red button (closest to the LED).

The LED on the remote will come on and the system will respond with 2 chirps from the horn and 2 flashes from the hazard lights of the vehicle. The system is now ARMED.

Press the Blue button.

The LED on the remote will come on and the system will respond with 1 chirp from the horn and 1 flash from the hazard lights of the vehicle. The system is now DISARMED. Enter the vehicle and start the vehicle.

 

Remote Control Battery "LOW" Indicator

The LED on the remote control will start flashing while pressing a button on the remote control when the battery needs to be replaced. The unit will also respond with 3 chirps from the horn and 1 flash of the hazards after the normal ARMING (2 chirps from the horn and 2 flashes of the hazards) or DISARMING (1 chirp from the horn and 1 flash of the hazards) to indicate that the battery needs to be replaced. Ensure that a new battery is fitted as soon as possible. The status LED of the vehicle will flash rapidly for 30 seconds to indicate that the remote battery needs to be replaced.

 

Alarm

The alarm is ARMED / DISARMED by means of the remote controls. The alarm protects the vehicle from entry via the doors, boot or bonnet.

 

Secret PIN Code and "One" event override

Ensure that you have received your Secret PIN Code card and that the secret 5-digit code is still covered by a scratch removable surface.

If the PIN code has been compromised, do not accept the installation that has been done. The secret code is used to add and remove remote controls to your system and to switch off the alarm in the event a remote control ceases to function. Utilise the ignition key and the LED to key in your secret PIN code.

 

1. Procedure for "One" event over-ride

Requires the ignition switch to key in your secret 5-digit code (e.g. 1, 3, 5, 7, 9).

1.1. Turn ignition ON and OFF 3 times within 3 seconds.

1.2. Turn ignition ON. The LED will turn ON continuously (Steady) for 2 seconds and then flash 5 times.

1.3. The LED will turn ON continuously (Steady) for 2 seconds again. During these 2 seconds turn ignition OFF and count 1 LED flash, then turn ignition ON (first digit of 1 entered).

1.4. Turn ignition OFF and count 3 LED flashes again, then turn ignition ON (second digit of 3 entered).

1.5. Turn ignition OFF and count 5 LED flashes again, then turn ignition ON (third digit of 5 entered).

1.6. Turn ignition OFF and count 7 LED flashes again, then turn ignition ON (fourth digit of 7 entered).

1.7. Turn ignition OFF and count 9 LED flashes again, then turn ignition ON (fifth digit of 9 entered).

1.8. Over-ride mode has now been entered, which is confirmed by 1 chirp of the horn, 1 flash of the hazards and 5 fast flashes of the LED.

1.9. Turn ignition OFF. The alarm will now be off until a remote is pressed again.

1.10. Replace the numbers 1, 3, 5, 7, 9 in the example above with your secret numbers when entering your code.

 

2. Addition of New remote controls

New remote controls can be added to the system with the secret 5-digit override code, one of the existing remote controls and the digits 1 and 4.

2.1. Follow the procedure for "One" event override, procedures 1.1. to 1.8.

2.2. Over-ride mode has now been entered as in procedure 1.8 (confirmed by 1 chirp, 1 Flash and 5 fast flashes of the LED).

2.3. Wait with ignition ON, after 5 seconds the LED will turn ON continuously (Steady) for 2 seconds and then flash 5 times.

2.4. The LED will turn ON continuously (Steady) for 2 seconds again. During these 2 seconds turn ignition OFF and count 1 LED flash, then turn ignition ON (first digit of 1 entered).

2.5. Turn ignition OFF and count 4 LED flashes again, then turn ignition ON (second digit of 4 entered).

2.6. The system will respond with 1 chirp, 1 Flash and 3 fast flashes of the LED.

2.7. Press one of the current remote controls. The system will respond with 2 chirps, 1 Flash and 5 fast flashes of the LED.

2.8. Press the new remote control to be added. The system will respond with 3 chirps, 1 Flash and 3 fast flashes of the LED.

2.9. Press the new remote control again to confirm. The system will respond with 3 chirps, 1 Flash and 3 fast flashes of the LED.

2.10. Turn ignition OFF to confirm the last setting that was chosen, the system will respond with 2 chirps, 1 Flash and 2 fast flashes of the LED.

2.11. If at any stage of the process no action is taken for more than 10 seconds, then a time-out will occur and no updates will be done requiring a start from the beginning. The system will respond with 1 chirp, 1 Flash and 1 flash of the LED.

 

Ultrasonic

The ultrasonic sensor if fitted, protects the interior of the vehicle.

When the system is ARMED by remote control the LED will start flashing at a faster rate and the ultrasonic sensor will be set within 15 seconds. Any movement within the vehicle will trigger the alarm.

To isolate the ultrasonic sensor to allow children or pets to be left in the vehicle but still arming the doors, press the Red button for 3 seconds when ARMING the system. The system will respond as normal (2 chirps of the horn and 2 flashes of the hazards) and will then give another 2 chirps and 2 flashes to indicate that the ultrasonic has been isolated. The LED will now be Steady ON to indicate that the system is in the ARMED state but that the ultrasonic is isolated.

 

Diagnostics

The system has an "intelligent" LED that indicates the cause of the alarm being triggered.

When the system is DISARMED and before the vehicle is started, the LED will flash a number of times every 4 seconds to indicate the cause of the alarm being triggered.

 

1 flash every 4 seconds - triggered by ultrasonic

2 flashes every 4 seconds - triggered by doors

3 flashes every 4 seconds - triggered by ultrasonic and doors

4 flashes every 4 seconds - triggered by ignition tamper

5 flashes every 4 seconds - triggered by ultrasonic and ignition tamper

6 flashes every 4 seconds - triggered by doors and ignition tamper

7 flashes every 4 seconds - triggered by ultrasonic, doors and ignition tamper

8 flashes every 4 seconds - triggered by auxiliary input

Diagnostics are cleared when ignition is turned ON or the system is ARMED again.

 

Panic

Holding down any of the remote control buttons for 6 seconds will activate the panic facility.

The Panic mode causes the hazards to flash and activates the siren for 25 seconds without any interruption being possible. Panic mode can be activated inside or outside the vehicle with the ignition on or off.

 

Central Locking

Central locking can be connected to the vehicle to operate locking and unlocking of doors via remote control. The doors can be locked and unlocked with the ignition ON or OFF. If connected, doors will lock upon starting of the vehicle unless a door is open at the time of starting or if the vehicle is in valet mode.

 

Custom Features

The following features can be customised at the time of installation of the system:

Chirps removed for silent mode ON/OFF operation.

Doors to unlock when ignition is switched OFF (if central locking fitted).

Doors not to lock when the ignition is turned ON (if central locking fitted).

Automatic ARMING of alarm within 30 seconds of ignition being switched OFF.

Selective unlocking of the driver’s door prior to the other doors (if central locking fitted).

 

WARRANTY

Goulas Electronics (Pty) Ltd warrants to the final purchaser of the Eurolock Security System, that the product identified on this manual is free from defects in material or workmanship.

This warranty is valid for a period of 24 months from the date of purchase.

Goulas Electronics (Pty) Ltd, at its discretion, will repair or replace the defective product when returned to Goulas Electronics (Pty) Ltd via the installer of the system.

In the event that no satisfaction can be obtained from the installer of the system, only then can the final purchaser approach Goulas Electronics (Pty) Ltd.

Goulas Electronics (Pty) Ltd shall not be responsible for any loss or damage of any nature whatsoever whether direct or indirect, consequential or otherwise, sustained as a result of the use of the product.

Improper use or mishandling of this product by the purchaser will render this warranty null and void.

No warranty claims will be entertained without presentation of invoice or the "Owners Manual" in which this warranty is contained, which has a date, installation centre and signature thereon.

Goulas Electronics (Pty) Ltd will charge the purchaser for services rendered outside the warranty period.

Any implied warranties in respect of this product are expressly excluded.

No agreement whether implied or referred are binding, unless agreed to in writing by Goulas Electronics (Pty) Ltd.

NB: IF THERE ARE ANY QUERIES KINDLY CONTACT YOUR INSTALLATION CENTRE.

Back

All Rights Reserved.
Copyright © Eurolock South Africa -

Maintained by
www.micro-ctrl.co.za